The 2 axis internal grinder is composed of a bed body, a head frame mechanism, a grinding head mechanism, a lubrication system and a cooling system, and a head frame rail mechanism for sliding the surface between the head frame mechanism and the bed body; There are two, and respectively in the sliding grinding head track mechanism; the two grinding head rail mechanisms are parallel to each other, and the head frame rail mechanism is perpendicular to the two grinding head rail mechanisms. The whole 2 axis internal grinder has novel structure, high processing efficiency and wide application range.
Before working on the 2 axis internal grinder, it is necessary to carefully check the hygiene of all parts of the machine tool, and clean the grinding surface of the work surface, the corrector, the shield, etc. Clear the dust in the ash tank; check whether the handle, switch and knob of the operation are in the correct position, and whether the control is flexible or not, and whether the safety device is safe and reliable.
Then turn on the power, check if the grinding wheel is loose, need to run at low speed for 2 to 3 minutes, and observe whether the running condition is normal, if there is abnormal rough waist stop check or report; check the liquid level indication in the oil mark Whether the height is suitable, if the oil level is insufficient, add enough lubricant according to the regulations; confirm that the lubrication is smooth and good, the electrical system and all parts are running normally and can start working.
After the work of the 2 axis internal grinder, carefully check the hygiene of all parts of the machine tool, clean the grinding surface of the work surface, the corrector, the shield, etc., remove the dust in the ash collecting tank, clean the surrounding environment of the machine tool; stop, the processing parts are not retained Machine tool, cut off the power.