1. CNC internal grinding machine manufacturer, can it have other products?
CNC internal grinding machine manufacturers can have other products, such as CNC internal grinding machines, single-end grinding machines, double-face grinding machines and internal grinding machines, and these are the specific and common types of grinding machines. In this way, you can enrich the product range of the manufacturer, and at the same time, you can also have a variety of options for the purchaser.
2. What are the main components of CNC internal grinding machine?
The main part of the CNC internal grinding machine is the one for the bed. Moreover, from a professional point of view, the bed is the basic support of the CNC internal grinding machine, on which there are grinding wheel frame, work table, head frame, tailstock and lateral sliding saddle to ensure that these parts work. Maintain accurate relative position. In addition, inside the bed, there is also an oil pool for hydraulic oil.
3. Are the grinding methods of different types of CNC internal grinding machines the same? Which fixtures will be used when installing the workpiece on the CNC internal grinding machine?
Different types of CNC internal grinding machines, from a professional point of view, the grinding method is different, there is a difference. On the CNC internal grinding machine, when the workpiece is installed, V-brackets, movement chucks, three-jaw levers, etc. are generally used, and they are often used.
4. Correction of CNC internal grinding machine
The correction of the CNC internal grinding machine is as follows:
The magnetic table and the dial indicator head can be used. The position of the workpiece is roughly corrected by the flower needle, and then the magnetic table and the dial gauge contact are used to perform the correcting work of the grinding machine. In its specific amount of loosening and tightening, it is to see the magnitude of the deviation, because it is determined by it.