Home > Exhibition > Content

Multi spindle grinding machine processing method and safety protection

Apr 19, 2019

The multi spindle grinding machine has a wide range of processing applications during operation. One of the main methods for precision machining of machine parts during use is that the grinding wheel is hard, brittle and not used due to the high rotational speed of the grinding wheel. A heavier impact, accidental mishandling, and crushing the grinding wheel can have very serious consequences. Therefore, the safety work of grinding is particularly important and reliable safety guards must be used.

The multi spindle grinding machine should be concentrated in the operation, so as to ensure that it is foolproof. During the working process, the grinding wheel of the grinding wheel splashes fine sand and metal shavings, which will hurt the worker's eyes. This kind of dust is harmful to the body and appropriate protective measures should be taken. Pay attention to the following safety technical issues when grinding. The machine should be thoroughly inspected before driving, including inspection of the steering mechanism, electrical equipment and magnetic chucks.

The multi spindle grinding machine is lubricated after inspection. After the lubrication, it needs to be tested. After confirming that everything is good, it can be used. When loading the workpiece, pay attention to the positive and tight clamping. During the grinding process, the workpiece is in the process of grinding. Looseness can cause serious consequences such as flying off the workpiece or damaging the grinding wheel. When starting work, apply the manual adjustment method to make the grinding wheel slower and closer to the workpiece. The starting feed rate should be small, and the force should not be too strong to prevent the grinding wheel from colliding. When it is necessary to use the iron stop to control the reciprocating motion of the worktable, it is necessary to accurately adjust the length of the workpiece according to the grinding length of the workpiece and tighten the retaining iron. When replacing the grinding wheel, a visual inspection must be performed first.www.changyigrinder.com