Home > Exhibition > Content

Matters needing attention in the use of Deep Hole Internal Grinder

Nov 18, 2019

Attention should be paid to the installation of grinding wheel; 1. Check the appearance of the grinding wheel before installation, tap the grinding wheel to hear a crisp sound to ensure that the grinding wheel is intact and undamaged. 2. The flange clamping grinding wheel should be padded with asbestos pad, balanced for the first time after clamping, and balanced again after installation and trimming. The new grinding wheel needs to be idle for five minutes.

The chips produced in the cutting process of grinder tools are not easy to be discharged automatically, so the phenomenon of blockage is easy to occur. Therefore, this aspect should be well controlled and, if necessary, mandatory chip removal should be carried out.

The efficiency of inner hole grinding is not high. As for the repair work of grinding tools, generally speaking, some special equipment can be used, such as grinding with tool grinder, etc., to achieve the purpose. Therefore, it can be said that for this job, as long as the choice of the right tools or equipment, there is no problem at all.

At the end of the work, the machine tool should be cleaned, the power supply should be cut off, the other parts are placed neatly, and the work site is kept clean.



https://www.changyigrinder.com/